Optimum Ultra Clay Mitt

$49.99 USD

Availabilty: In stock



SHARE THIS PRODUCT

The easy to use Optimum Ultra Clay Mitt maintains a clean & smooth surface!

●             BEFORE WAXING, BUFFING, & POLISHING

●             TRULY CLEANS & SMOOTHS THE FINISH

●             INCREASES GLOSS, DEPTH, & SHINE

●             HELPS WAX & SEALANTS LAST LONGER

You can wash, clay and wax in one step by washing with Optimum No Rinse then apply 2 sprays of Optimum Car Wax per panel. Then use Optimum Ultra Clay Mitt to remove surface contaminants. Use Microfiber Drying Towel to dry the car.

DIRECTIONS FOR USE:

1. Wash vehicle to remove loose dirt and debris.

2. Spray Optimum No Rinse (2 oz to 1 gal) on a small section of the vehicle. (Alternatively, you can use Optimum Instant Detailer or Car Wax.)

3. Gently rub Optimum Ultra Clay Mitt over the lubricated area until contaminants are removed and surface is smooth. Wipe area with an Optimum Microfiber Drying Towel. Continue in sections until vehicle is fully decontaminated.

4. Follow with Optimum Car Wax, Optimum Polish, or Opti-Seal.

Prior to initial use rub Optimum Ultra Clay Mitt on glass using clay lubricant. Inspect surface of Optimum Ultra Clay Mitt before and during use. To clean the clay surface, spray clay surface with lubricant and wipe gently with hand. After repeated use, or if too much contamination is present, discard and use a new Optimum Ultra Clay Mitt.

 

●             Do not soak in liquid.

●             Do not squeeze or wring out.

●             Do not store laying flat on clay media surface.

●             Do not store wet in air tight containers.

 

USE BEFORE WAXING: removes surface contaminants.